XDC 150 HD

Petrol-powered ride-on mower with 414 cc STIGA engine, 84 cm cutting deck with two blades and 200 L rear grass collector.
  • check STIGA engine with net power output of 6.3 kW @ 2400 rpm
  • check Pedal-operated hydrostatic transmission
  • check 84 cm cutting deck with anti-scalp wheels
  • check 200 L grass collector
  • check Headlights and front bumper
  • check Battery charger sold separately
The Castelgarden XDC 150 HD is a ride-on mower powered by a single-cylinder engine with a net power output of 6.3 kW @ 2400 rpm. The mower is equipped with a pedal-operated hydrostatic transmission that enables steady forward speed control without having to change gears. The 84 cm cutting deck has two blades and 7 cutting height settings ranging from 25 to 80 mm with an electromagnetic blade engagement clutch. The XDC 150 HD has a 200-litre rear grass collector, an ergonomically designed seat, LED dashboard and headlights. Battery charger and tow hitch included. This mower can be set to mulch grass clippings using an optional mulching kit.
More Information
Shop OnlineNo
Short DescriptionPetrol-powered ride-on mower with 414 cc STIGA engine, 84 cm cutting deck with two blades and 200 L rear grass collector.
EAN/UPC8008984851245
Unique selling point 04200 L grass collector
Unique selling point 02Pedal-operated hydrostatic transmission
Unique selling point 05Headlights and front bumper
Unique selling point 0384 cm cutting deck with anti-scalp wheels
Unique selling point 06Battery charger sold separately
Unique selling point 01STIGA engine with net power output of 6.3 kW @ 2400 rpm
Award 3 logono_selection
Award 2 logono_selection
Award 1 logono_selection
Certification CE logono_selection
FAQ 1 questionWhat is the proper way to clean the lawn tractor after mowing the grass?
FAQ 1 answerThe exterior of the tractor mower must be cleaned with water and detergent, paying attention not to get water in the electrical system, motor and circuit board located under the instrument panel. The collection bag should be emptied and cleaned of residue, then remounted so the cutting assembly can be washed, and then removed, rinsed and allowed to dry. When washing the cutting device assembly and the expulsion chute, the collection bag or rear discharge shield must be fitted, the operator must be seated, the cutting device assembly must be in position “1”, the engine running, transmission placed in neutral and the cutting device must be connected. Then connect a water hose to the appropriate pipe fittings and allow the water to flow for a few minutes while keeping the cutting devices in motion.
FAQ 2 questionWhat action should be carried out before winter storage or before storing it for a period longer than 30 days?
FAQ 2 answerAfter allowing the engine to cool down and fully recharging the battery, disconnect the battery cables and store it in a cool and dry place. Empty the fuel tank, clean the machine thoroughly, check the condition of the cutting device assembly, and, if necessary, contact the service centre. Then store the lawn tractor with the cutting deck in a lowered position, in a sheltered environment and, if possible, covered with a sheet.
FAQ 3 questionWhat action should be carried out before initially using a riding tractor that has been stored over a winter or for a period longer than 30 days?
FAQ 3 answerRefuel it and check the oil level, air filter and petrol filter. Check that the tyres are correctly pressurised and then set up the lawn mower tractor according to how you intend to carry out the mowing (side discharge, collection, rear discharge, mulching). For further information about the preliminary operations and safety checks, please refer to the designated sections of the instructions manual.
FAQ 4 questionWhat standard maintenance operations does the lawn mower tractor need?
FAQ 4 answerBefore each use, we recommend that you perform safety and control checks, check the tyre pressure, and replenish the fuel and oil tank, if necessary. After each use, arrange for a general cleaning of the riding tractor. Please refer to the designated section of the instruction manual (“maintenance table”) for the regular actions recommended to ensure optimal use of the machine.
FAQ 5 questionWhat are the cutting functions of the lawn tractor?
FAQ 5 answerThe riding tractor can be set up in different cutting modes: rear bag collection or rear discharge, or mowing and chopping the grass using the special “mulching kit” function. The mulching cutting system allows you to mow the grass into fine particles, which remain on the lawn, restore nutrients and support growth.
FAQ 6 questionWhat kinds of parts and accessories can the lawn tractor be equipped with?
FAQ 6 answerThe lawn tractor can be equipped with various parts and accessories to increase its functions and ensure maximum versatility all year round. For the complete list of parts and accessories, please refer to the relevant product page on the website.
Battery capacity18 Ah
Power sourcePetrol
Power6.3 kW
Engine BrandSTIGA
Engine modelST 400 Powered by STIGA
Displacement414 cm³
Engine rotation speed2400 rpm
Battery Voltage12 V
ChokeManual
Engine coolingAir
Fuel tank capacity6 l
Maximum working area3500.000000
Minimum uncut radius80 cm
Cutting methodCollecting
Cutting width84 cm
Reverse mowingYes
Blade rotationUntimed
Cutting height adjustmentManual with lever
Cutting height positions7 positions
Cutting height range25 - 80 mm
Number of blades2
Blade typeWinged
Additional cutting methodRear discharge, Mulching
Blade engagement typeElectric
TractionRear-wheel drive
Transmission typeHydrostatic
Transmission methodPedal-operated
Collector emptyingManual
Collector capacity240 l
Steering wheelCastelgarden ergonomic
Seat typeCastelgarden classic
Seat adjustmentScrews
DashboardYes with LED
Front wheel size15x6.00-6
Rear wheel size18x8.50-8
Hour meterNo
HeadlightsConventional
Cruise controlNo
BumperYes
Washing linkYes
Collector typeTextile
Storage compartmentYes
Cup holderYes
Pivoting front axleYes
Antiscalp wheels2
Safety systemSeat with Safety Contact Breaker
Mulching kitOptional
Battery chargerOptional
Trailer hitch kitOptional
Measured sound pressure level at operator ear dB(A)86
Max vibration on steering wheels (m/s2)6.37
Measured sound power level dB(A)100
Max vibration on driver's seat (m/s2)1.06
Guaranteed sound power level (LwA) - dB(A)100
Pack weight230 kg
Product length2338 mm
Product width880 mm
Product height1100 mm
Product weight166.000000
SKU2T2100473/C22
Write Your Own Review
You're reviewing:XDC 150 HD

Key features

Product details and specs

The Castelgarden XDC 150 HD is a ride-on mower powered by a single-cylinder engine with a net power output of 6.3 kW @ 2400 rpm. The mower is equipped with a pedal-operated hydrostatic transmission that enables steady forward speed control without having to change gears. The 84 cm cutting deck has two blades and 7 cutting height settings ranging from 25 to 80 mm with an electromagnetic blade engagement clutch. The XDC 150 HD has a 200-litre rear grass collector, an ergonomically designed seat, LED dashboard and headlights. Battery charger and tow hitch included. This mower can be set to mulch grass clippings using an optional mulching kit.

Technical specs

General info
EAN/UPC8008984851245
SKU2T2100473/C22
Cutting system
Minimum uncut radius80 cm
Cutting methodCollecting
Cutting width84 cm
Reverse mowingYes
Blade rotationUntimed
Cutting height adjustmentManual with lever
Cutting height positions7 positions
Cutting height range25 - 80 mm
Number of blades2
Blade typeWinged
Additional cutting methodRear discharge, Mulching
Blade engagement typeElectric
Transmission
Transmission typeHydrostatic
Transmission methodPedal-operated
Tools kit
Mulching kitOptional
Battery chargerOptional
Trailer hitch kitOptional
Overall dimensions
Pack weight230 kg
Product length2338 mm
Product width880 mm
Product height1100 mm
Product weight166 kg
Power
Battery capacity18 Ah
Power sourcePetrol
Power6.3 kW
Engine BrandSTIGA
Engine modelST 400 Powered by STIGA
Displacement414 cm³
Engine rotation speed2400 rpm
Battery Voltage12 V
ChokeManual
Engine coolingAir
Fuel tank capacity6 l
Maximum working area3500 ㎡
Drive system
TractionRear-wheel drive
Equipment
Collector emptyingManual
Collector capacity240 l
Steering wheelCastelgarden ergonomic
Seat typeCastelgarden classic
Seat adjustmentScrews
DashboardYes with LED
Front wheel size15x6.00-6
Rear wheel size18x8.50-8
HeadlightsConventional
BumperYes
Washing linkYes
Collector typeTextile
Storage compartmentYes
Cup holderYes
Pivoting front axleYes
Antiscalp wheels2
Safety systemSeat with Safety Contact Breaker
Vibration and noise data
Measured sound pressure level at operator ear dB(A)86
Max vibration on steering wheels (m/s2)6.37
Measured sound power level dB(A)100
Max vibration on driver's seat (m/s2)1.06
Guaranteed sound power level (LwA) - dB(A)100

Support

Support

  • What is the proper way to clean the lawn tractor after mowing the grass?

    The exterior of the tractor mower must be cleaned with water and detergent, paying attention not to get water in the electrical system, motor and circuit board located under the instrument panel. The collection bag should be emptied and cleaned of residue, then remounted so the cutting assembly can be washed, and then removed, rinsed and allowed to dry. When washing the cutting device assembly and the expulsion chute, the collection bag or rear discharge shield must be fitted, the operator must be seated, the cutting device assembly must be in position “1”, the engine running, transmission placed in neutral and the cutting device must be connected. Then connect a water hose to the appropriate pipe fittings and allow the water to flow for a few minutes while keeping the cutting devices in motion.

    What action should be carried out before initially using a riding tractor that has been stored over a winter or for a period longer than 30 days?

    Refuel it and check the oil level, air filter and petrol filter. Check that the tyres are correctly pressurised and then set up the lawn mower tractor according to how you intend to carry out the mowing (side discharge, collection, rear discharge, mulching). For further information about the preliminary operations and safety checks, please refer to the designated sections of the instructions manual.

    What are the cutting functions of the lawn tractor?

    The riding tractor can be set up in different cutting modes: rear bag collection or rear discharge, or mowing and chopping the grass using the special “mulching kit” function. The mulching cutting system allows you to mow the grass into fine particles, which remain on the lawn, restore nutrients and support growth.

    What action should be carried out before winter storage or before storing it for a period longer than 30 days?

    After allowing the engine to cool down and fully recharging the battery, disconnect the battery cables and store it in a cool and dry place. Empty the fuel tank, clean the machine thoroughly, check the condition of the cutting device assembly, and, if necessary, contact the service centre. Then store the lawn tractor with the cutting deck in a lowered position, in a sheltered environment and, if possible, covered with a sheet.

    What standard maintenance operations does the lawn mower tractor need?

    Before each use, we recommend that you perform safety and control checks, check the tyre pressure, and replenish the fuel and oil tank, if necessary. After each use, arrange for a general cleaning of the riding tractor. Please refer to the designated section of the instruction manual (“maintenance table”) for the regular actions recommended to ensure optimal use of the machine.

    What kinds of parts and accessories can the lawn tractor be equipped with?

    The lawn tractor can be equipped with various parts and accessories to increase its functions and ensure maximum versatility all year round. For the complete list of parts and accessories, please refer to the relevant product page on the website.

Compatible Products

Related Accessories

  1. COMBI CART PLASTIC
    COMBI CART PLASTIC
    Combi Cart with 180 litre capacity. Suitable for use with garden tractors and front mowers, it's ideal to be used during Spring, Summer and Autumn while working in the garden.
  2. FERTILIZER SPREADER
    FERTILIZER SPREADER
    original seed and fertiliser spreader, for use with garden tractors and front mowers. The perfect accessory to be used in Spring.
  3. REAR DEFLECTOR KIT 84-98 CM
    REAR DEFLECTOR KIT 84-98 CM
    original rear deflector kit for garden tractors with 84-98 cm cutting decks. Use it during Spring and Summer to cut grass in rear discharge mode.
  4. MULCHING KIT WITH BLADES 84 CM
    MULCHING KIT WITH BLADES 84 CM
    original mulching kit for garden tractors. Includes muclhing blade and plug. Ideal to be used throughout Spring and Summer.
  5. TRAILER HITCH KIT 84-98 CM
    TRAILER HITCH KIT 84-98 CM
    original trailer hitch for garden tractors with 84-98 cm cutting decks. Use it all year round to extend the functions of your garden tractor.
  6. WINTER REAR WHEELS 18
    WINTER REAR WHEELS 18"
    18" rear winter tyre kit for garden tractors.
  7. SNOW TYRES SPIKES
    SNOW TYRES SPIKES
    Snow tyre studs for garden tractors, including front-cut models.
  8. SNOW CHAINS 18
    SNOW CHAINS 18"
    Snow chains for 18" wheels on garden tractors.
  9. POLY ROLLER 36
    POLY ROLLER 36"
    36" plastic roller accessory for garden tractors.
  10. SNOW BLADE 107 CM
    SNOW BLADE 107 CM
    STIGA original winter accessory, suitable for all garden tractors and ideal to clear big piles of snow from walk- and driveways.
  11. POLY ROLLER 23
    POLY ROLLER 23"
    Plastic roller for garden tractors, including front cut ride-on mowers.
Garden Size Measurement
Draw the area of your lawn on the map and find the most suitable products.
Zoom in on your property. Click or tap to draw a path around your garden to measure the area.

CookieBot