-
International -
Austria -
Belgium FR - NL -
Italy -
Netherlands
Petrol tractor
XDC 180 HD
Collecting lawn tractor with a 240 L grassbag and 98 cm wide cutting deck, suitable to cut grass in big gardens. Powered by a twin-cylinder engine. Pedal-operated hydrostatic drive for easy speed management. Electromagnetic blade engagement clutch for effortless blade management.
- Collecting model, with a 240 L grassbag
- Powered by a twin-cylinder STIGA ST 550 engine
- 98 cm cutting deck with 7 available cutting heights for great flexibility
- Electromagnetic blade engagement for easy blade management
- Extra-comfort through ergonomically designed seat and soft-grip steering wheel
- Battery charger, mulching kit and tow hook not included
Petrol tractor
XDC 180 HD
Often purchased together
Description
The Castelgarden XDC 180 HD lawn tractor is specifically designed for collecting large quantities of cut grass efficiently. Equipped with a powerful STIGA ST 550 twin-cylinder engine, this tractor features a 98 cm cutting deck with two blades and anti-scalp wheels, ensuring a clean cut. The pedal-operated hydrostatic transmission allows for smooth and stress-free speed management. With seven adjustable cutting heights ranging from 25 to 80 mm, you can easily adapt to varying grass conditions. The electromagnetic blade engagement clutch provides effortless control without the hassle of levers. The spacious 240 L grass collector allows for longer mowing sessions without interruption, while the ergonomically designed seat and soft-grip steering wheel provide comfort during use. For added versatility, a battery charger, mulching kit, and tow hook are available separately. The Castelgarden XDC 180 HD is your ideal companion for maintaining large gardens with ease.
Faqs
What is the proper way to clean the lawn tractor after mowing the grass?
The exterior of the tractor mower must be cleaned with water and detergent, paying attention not to get water in the electrical system, motor and circuit board located under the instrument panel. The collection bag should be emptied and cleaned of residue, then remounted so the cutting assembly can be washed, and then removed, rinsed and allowed to dry. When washing the cutting device assembly and the expulsion chute, the collection bag or rear discharge shield must be fitted, the operator must be seated, the cutting device assembly must be in position “1”, the engine running, transmission placed in neutral and the cutting device must be connected. Then connect a water hose to the appropriate pipe fittings and allow the water to flow for a few minutes while keeping the cutting devices in motion.
What action should be carried out before winter storage or before storing it for a period longer than 30 days?
After allowing the engine to cool down and fully recharging the battery, disconnect the battery cables and store it in a cool and dry place. Empty the fuel tank, clean the machine thoroughly, check the condition of the cutting device assembly, and, if necessary, contact the service centre. Then store the lawn tractor with the cutting deck in a lowered position, in a sheltered environment and, if possible, covered with a sheet.
What action should be carried out before initially using a riding tractor that has been stored over a winter or for a period longer than 30 days?
Refuel it and check the oil level, air filter and petrol filter. Check that the tyres are correctly pressurised and then set up the lawn mower tractor according to how you intend to carry out the mowing (side discharge, collection, rear discharge, mulching). For further information about the preliminary operations and safety checks, please refer to the designated sections of the instructions manual.
What standard maintenance operations does the lawn mower tractor need?
Before each use, we recommend that you perform safety and control checks, check the tyre pressure, and replenish the fuel and oil tank, if necessary. After each use, arrange for a general cleaning of the riding tractor. Please refer to the designated section of the instruction manual (“maintenance table”) for the regular actions recommended to ensure optimal use of the machine.
What are the cutting functions of the lawn tractor?
The riding tractor can be set up in different cutting modes: rear bag collection or rear discharge, or mowing and chopping the grass using the special “mulching kit” function. The mulching cutting system allows you to mow the grass into fine particles, which remain on the lawn, restore nutrients and support growth.
What kinds of parts and accessories can the tractor mower be equipped with?
The lawn tractor can be equipped with various parts and accessories to increase its functions and ensure maximum versatility all year round. For the complete list of parts and accessories, please refer to the relevant product page on the website.
Specifications
General info
EAN/UPC
8008984851665
SKU
2T2630473/C22
Power
Power source
Petrol
Battery capacity
18 Ah
Power
10.4 kW
Engine Brand
STIGA
Engine model
ST 550 Twin Powered by STIGA
Displacement
586 cm³
Engine rotation speed
2600 rpm
Battery Voltage
12 V
Choke
Manual
Engine cooling
Air
Fuel tank capacity
6 l
Mowing area
5500 ㎡
Cutting system
Minimum uncut radius
70 cm
Cutting width
98 cm
Reverse mowing
Yes
Blade rotation
Untimed
Cutting height adjustment
Manual with lever
Cutting height positions
7 positions
Cutting height range
25 - 80 mm
Number of blades
2
Blade type
Winged
Additional cutting method
Rear discharge, Mulching
Blade engagement type
Electric
Drive system
Traction
Rear-wheel drive
Transmission
Transmission method
Pedal-operated
Transmission type
Hydrostatic
Equipment
Collector emptying
Manual
Collector capacity
240 l
Steering wheel
Castelgarden ergonomic
Seat type
Castelgarden classic
Seat adjustment
Screws
Dashboard
Yes with LED
Front wheel size
15x6.00-6
Rear wheel size
18x8.50-8
Hour meter
No
Headlights
Conventional
Cruise control
No
Bumper
Yes
Washing link
Yes
Collector type
Textile
Storage compartment
Yes
Cup holder
Yes
Pivoting front axle
Yes
Antiscalp wheels
2
Safety system
Seat with Safety Contact Breaker
Tools kit
Mulching kit
Included
Battery charger
Optional
Trailer hitch kit
Included
Vibration and noise data
Guaranteed sound power level (LwA) - dB(A)
100
Max vibration on driver's seat (m/s2)
0.7
Max vibration on steering wheels (m/s2)
8.2
Measured sound power level dB(A)
100
Measured sound pressure level at operator ear dB(A)
86
Overall dimensions
Pack weight
237 kg
Product length
2338 mm
Product width
1020 mm
Product height
1100 mm
Product weight
201 kg
