Shop Online | No |
Short Description | Ride-on mower with 352 cc petrol engine, 84 cm cutting deck and 200 L rear grass collector. |
EAN/UPC | 8008984851238 |
Unique selling point 02 | Transmission with 6 gears: 5 forward gears and 1 reverse |
Unique selling point 05 | Battery charger available separately |
Unique selling point 01 | ST 350 engine with net power output of 5.8 kW @ 2400 rpm |
Unique selling point 04 | 200 L grass collector |
Unique selling point 03 | 84 cm cutting deck |
Award 3 logo | no_selection |
Award 2 logo | no_selection |
Award 1 logo | no_selection |
Certification CE logo | /f/8/f8d026f1506d1d8196ac0ce4831a0ede77609710_CE_ecommerce_1939.jpg |
FAQ 1 answer | The exterior of the tractor mower must be cleaned with water and detergent, paying attention not to get water in the electrical system, motor and circuit board located under the instrument panel. The collection bag should be emptied and cleaned of residue, then remounted so the cutting assembly can be washed, and then removed, rinsed and allowed to dry. When washing the cutting device assembly and the expulsion chute, the collection bag or rear discharge shield must be fitted, the operator must be seated, the cutting device assembly must be in position “1”, the engine running, transmission placed in neutral and the cutting device must be connected. Then connect a water hose to the appropriate pipe fittings and allow the water to flow for a few minutes while keeping the cutting devices in motion. |
FAQ 1 question | What is the proper way to clean the lawn tractor after mowing the grass? |
FAQ 2 question | What action should be carried out before winter storage or before storing it for a period longer than 30 days? |
FAQ 2 answer | After allowing the engine to cool down and fully recharging the battery, disconnect the battery cables and store it in a cool and dry place. Empty the fuel tank, clean the machine thoroughly, check the condition of the cutting device assembly, and, if necessary, contact the service centre. Then store the lawn tractor with the cutting deck in a lowered position, in a sheltered environment and, if possible, covered with a sheet. |
FAQ 3 question | What action should be carried out before initially using a riding tractor that has been stored over a winter or for a period longer than 30 days? |
FAQ 3 answer | Refuel it and check the oil level, air filter and petrol filter. Check that the tyres are correctly pressurised and then set up the lawn mower tractor according to how you intend to carry out the mowing (side discharge, collection, rear discharge, mulching). For further information about the preliminary operations and safety checks, please refer to the designated sections of the instructions manual. |
FAQ 4 question | What standard maintenance operations does the lawn mower tractor need? |
FAQ 4 answer | Before each use, we recommend that you perform safety and control checks, check the tyre pressure, and replenish the fuel and oil tank, if necessary. After each use, arrange for a general cleaning of the riding tractor. Please refer to the designated section of the instruction manual (“maintenance table”) for the regular actions recommended to ensure optimal use of the machine. |
FAQ 5 question | What are the cutting functions of the lawn tractor? |
FAQ 5 answer | The riding tractor can be set up in different cutting modes: rear bag collection or rear discharge, or mowing and chopping the grass using the special “mulching kit” function. The mulching cutting system allows you to mow the grass into fine particles, which remain on the lawn, restore nutrients and support growth. |
FAQ 6 question | What kinds of parts and accessories can the tractor lawn mower be equipped with? |
FAQ 6 answer | The lawn tractor can be equipped with various parts and accessories to increase its functions and ensure maximum versatility all year round. For the complete list of parts and accessories, please refer to the relevant product page on the website. |
Power | 5.8 kW |
Battery capacity | 18 Ah |
Power source | Petrol |
Engine Brand | STIGA |
Engine model | ST 350 Powered by STIGA |
Displacement | 352 cm³ |
Engine rotation speed | 2400 rpm |
Battery Voltage | 12 V |
Choke | Manual |
Engine cooling | Air |
Fuel tank capacity | 6 l |
Suggested working area | 3000.000000 |
Minimum uncut radius | 80 cm |
Cutting width | 84 cm |
Reverse mowing | Yes |
Blade rotation | Untimed |
Cutting height adjustment | Manual with lever |
Cutting height positions | 7 positions |
Cutting height range | 25 - 80 mm |
Number of blades | 2 |
Blade type | Winged |
Additional cutting method | Rear discharge, Mulching |
Blade engagement type | Electric |
Traction | Rear-wheel drive |
Transmission type | Mechanical |
Transmission method | Lever-operated |
Number of gears | 5 forward + 1 reverse |
Collector emptying | Manual |
Collector capacity | 200 l |
Steering wheel | Castelgarden ergonomic |
Seat type | Castelgarden classic |
Seat adjustment | Screws |
Dashboard | Yes with LED |
Front wheel size | 15x6.00-6 |
Rear wheel size | 18x8.50-8 |
Hour meter | No |
Headlights | Conventional |
Cruise control | No |
Bumper | Yes |
Washing link | Yes |
Collector type | Textile |
Storage compartment | Yes |
Cup holder | Yes |
Pivoting front axle | Yes |
Antiscalp wheels | 2 |
Safety system | Seat with Safety Contact Breaker |
Mulching kit | Optional |
Battery charger | Optional |
Trailer hitch kit | Optional |
Measured sound pressure level at operator ear dB(A) | 86 |
Guaranteed sound power level (LwA) - dB(A) | 100 |
Measured sound power level dB(A) | 100 |
Max vibration on steering wheels (m/s2) | 6.37 |
Max vibration on driver's seat (m/s2) | 1.06 |
Pack weight | 224 kg |
Product length | 2338 mm |
Product width | 880 mm |
Product height | 1100 mm |
Product weight | 160.000000 |
SKU | 2T2010473/C22 |
---|