Shop Online | No |
Short Description | Lawn tractor made for side-discharge, ideal to manage overgrown and wild grass, thanks to the 98 cm wide cutting deck and side discharge funnel. Powered by a single-cylinder engine. Ergonomically-designed seat ensures greater comfort while working. Mulching kit is sold separately. |
EAN/UPC | 8008984851719 |
Unique selling point 04 | Easy speed management, thanks to pedal-operated hydrostatic transmission |
Unique selling point 06 | Mulching kit and battery charger sold separately |
Unique selling point 05 | Extra-comfort through ergonomically designed seat |
Unique selling point 01 | Side-discharge lawn tractor, perfect for wild or overgrown grass |
Unique selling point 03 | 98 cm cutting deck with 7 available cutting heights for great flexibility |
Unique selling point 02 | Powered by a STIGA single-cylinder engine |
Key features 1 description | This lawn tractor has a special side funnel, created to discharge cut grass without any risk of blockage, even with very tall and wet grass. |
Key features 1 title | Side discharge without any lawn blockage |
Key features 2 title | Cutting height is adjustable as preferred |
Key features 2 description | Thanks to 7 available cutting height settings, the cutting deck can operate from 25 mm up to 80 mm and cut grass in different conditions. |
Key features 3 title | Maximum comfort |
Key features 3 description | The ergonomically-designed seat allows great comfort also during long cutting sessions. |
Award 3 logo | no_selection |
Award 2 logo | no_selection |
Award 1 logo | no_selection |
Certification CE logo | no_selection |
FAQ 1 question | What is the proper way to clean the lawn tractor after mowing the grass? |
FAQ 1 answer | The exterior of the tractor mower must be cleaned with water and detergent, paying attention not to get water in the electrical system, motor and circuit board located under the instrument panel. The collection bag should be emptied and cleaned of residue, then remounted so the cutting assembly can be washed, and then removed, rinsed and allowed to dry. When washing the cutting device assembly and the expulsion chute, the collection bag or rear discharge shield must be fitted, the operator must be seated, the cutting device assembly must be in position “1”, the engine running, transmission placed in neutral and the cutting device must be connected. Then connect a water hose to the appropriate pipe fittings and allow the water to flow for a few minutes while keeping the cutting devices in motion. |
FAQ 2 question | What action should be carried out before winter storage or before storing it for a period longer than 30 days? |
FAQ 2 answer | After allowing the engine to cool down and fully recharging the battery, disconnect the battery cables and store it in a cool and dry place. Empty the fuel tank, clean the machine thoroughly, check the condition of the cutting device assembly, and, if necessary, contact the service centre. Then store the lawn tractor with the cutting deck in a lowered position, in a sheltered environment and, if possible, covered with a sheet. |
FAQ 3 question | What action should be carried out before initially using a riding tractor that has been stored over a winter or for a period longer than 30 days? |
FAQ 3 answer | Refuel it and check the oil level, air filter and petrol filter. Check that the tyres are correctly pressurised and then set up the lawn mower tractor according to how you intend to carry out the mowing (side discharge, collection, rear discharge, mulching). For further information about the preliminary operations and safety checks, please refer to the designated sections of the instructions manual. |
FAQ 4 question | What standard maintenance operations does the lawn mower tractor need? |
FAQ 4 answer | Before each use, we recommend that you perform safety and control checks, check the tyre pressure, and replenish the fuel and oil tank, if necessary. After each use, arrange for a general cleaning of the riding tractor. Please refer to the designated section of the instruction manual (“maintenance table”) for the regular actions recommended to ensure optimal use of the machine. |
FAQ 5 question | What are the cutting functions of the lawn tractor? |
FAQ 5 answer | The riding tractor can be set up in different cutting modes: rear bag collection or rear discharge, or mowing and chopping the grass using the special “mulching kit” function. The mulching cutting system allows you to mow the grass into fine particles, which remain on the lawn, restore nutrients and support growth. |
FAQ 6 question | What kinds of parts and accessories can the tractor lawn mower be equipped with? |
FAQ 6 answer | The lawn tractorcan be equipped with various parts and accessories to increase its functions and ensure maximum versatility all year round. For the complete list of parts and accessories, please refer to the relevant product page on the website. |
Battery capacity | 18 Ah |
Power | 7.1 kW |
Power source | Petrol |
Engine Brand | STIGA |
Engine model | ST 400 Powered by STIGA |
Displacement | 414 cm³ |
Engine rotation speed | 2800 rpm |
Battery Voltage | 12 V |
Choke | Manual |
Engine cooling | Air |
Fuel tank capacity | 6 l |
Maximum working area | 5000.000000 |
Cutting method | Side discharge |
Minimum uncut radius | 70 cm |
Cutting width | 98 cm |
Reverse mowing | Yes |
Blade rotation | Untimed |
Cutting height adjustment | Manual with lever |
Cutting height positions | 7 positions |
Cutting height range | 25 - 80 mm |
Number of blades | 2 |
Blade type | Mulching |
Additional cutting method | Mulching |
Blade engagement type | Electric |
Traction | Rear-wheel drive |
Transmission method | Pedal-operated |
Transmission type | Hydrostatic |
Steering wheel | Castelgarden ergonomic |
Seat type | Castelgarden classic |
Seat adjustment | Screws |
Dashboard | No |
Front wheel size | 15x6.00-6 |
Rear wheel size | 18x8.50-8 |
Hour meter | No |
Headlights | Conventional |
Cruise control | No |
Bumper | Yes |
Washing link | Yes |
Storage compartment | Yes |
Cup holder | Yes |
Pivoting front axle | Yes |
Antiscalp wheels | 2 |
Safety system | Seat with Safety Contact Breaker |
Mulching kit | Optional |
Battery charger | Optional |
Trailer hitch kit | Optional |
Measured sound pressure level at operator ear dB(A) | 86 |
Measured sound power level dB(A) | 99 |
Max vibration on steering wheels (m/s2) | 3.33 |
Max vibration on driver's seat (m/s2) | 0.94 |
Guaranteed sound power level (LwA) - dB(A) | 100 |
Pack weight | 207.5 kg |
Product length | 1726 mm |
Product width | 1200 mm |
Product height | 1100 mm |
Product weight | 161.000000 |
SKU | 2T0610473/C22 |
---|