-
International -
Austria -
Belgium FR - NL -
Italy -
Netherlands
XDL 210 HD
Petrol tractor
Lawn tractor made for side-discharge, ideal to manage overgrown and wild grass, thanks to the 108 cm wide cutting deck and side discharge funnel. Powered by a twin-cylinder engine. Pedal-operated hydrostatic drive for easy speed management. Powerful headlights for enhanced visibility of the area to be cut.
- Side-discharge lawn tractor, perfect for wild or overgrown grass
- Powered by a twin-cylinder STIGA ST 550 engine
- 108 cm cutting deck with 7 available cutting heights for great flexibility
- Easy speed management, thanks to pedal-operated hydrostatic transmission
- Powerful headlights, for improved visibility
- Mulching kit available separately
Product details and specs
Castelgarden XDL 210 HD lawn tractor is made for cutting big quantities of tall or wild grass and side discharging it. This strong lawn tractor is powered by a STIGA ST 550 twin-cylinder engine.
The pedal-operated hydrostatic transmission allows an easier and stress-less speed management.
The 108 cm cutting deck is equipped with two blades, that can be activated through a simple button, and anti-scalp wheels. The cutting height can be adjusted to 7 different settings, ranging from 25 to 80 mm, to better adapt any grass condition. The powerful hedalights allow to work also in low-light conditions.
The battery charger and mulching kit are sold separately.
The pedal-operated hydrostatic transmission allows an easier and stress-less speed management.
The 108 cm cutting deck is equipped with two blades, that can be activated through a simple button, and anti-scalp wheels. The cutting height can be adjusted to 7 different settings, ranging from 25 to 80 mm, to better adapt any grass condition. The powerful hedalights allow to work also in low-light conditions.
The battery charger and mulching kit are sold separately.
Technical specs
General info
EAN/UPC
8008984851726
SKU
2T1220473/C22
Power
Battery capacity
18 Ah
Power
10.8 kW
Power source
Petrol
Engine Brand
STIGA
Engine model
ST 550 Twin Powered by STIGA
Displacement
586 cm³
Engine rotation speed
2800 rpm
Battery Voltage
12 V
Choke
Manual
Engine cooling
Air
Fuel tank capacity
6 l
Suggested working area
6000 ㎡
Cutting system
Minimum uncut radius
65 cm
Cutting width
108 cm
Reverse mowing
Yes
Blade rotation
Untimed
Cutting height adjustment
Manual with lever
Cutting height positions
7 positions
Cutting height range
25 - 80 mm
Number of blades
2
Blade type
Mulching
Additional cutting method
Mulching
Blade engagement type
Electric
Drive system
Traction
Rear-wheel drive
Transmission
Transmission method
Pedal-operated
Transmission type
Hydrostatic
Equipment
Steering wheel
Castelgarden ergonomic
Seat type
Castelgarden classic
Seat adjustment
Screws
Dashboard
No
Front wheel size
15x6.00-6
Rear wheel size
18x8.50-8
Hour meter
No
Headlights
Conventional
Cruise control
No
Bumper
Yes
Washing link
Yes
Storage compartment
Yes
Cup holder
Yes
Pivoting front axle
Yes
Antiscalp wheels
2
Safety system
Seat with Safety Contact Breaker
Tools kit
Mulching kit
Optional
Battery charger
Optional
Trailer hitch kit
Optional
Vibration and noise data
Guaranteed sound power level (LwA) - dB(A)
100
Max vibration on driver's seat (m/s2)
1.2
Max vibration on steering wheels (m/s2)
3
Measured sound power level dB(A)
99
Measured sound pressure level at operator ear dB(A)
87
Overall dimensions
Pack weight
205.5 kg
Product length
1726 mm
Product width
1315 mm
Product height
1100 mm
Product weight
160 kg
Related Accessories
Support
What is the proper way to clean the lawn tractor after mowing the grass?
The exterior of the tractor mower must be cleaned with water and detergent, paying attention not to get water in the electrical system, motor and circuit board located under the instrument panel. The collection bag should be emptied and cleaned of residue, then remounted so the cutting assembly can be washed, and then removed, rinsed and allowed to dry. When washing the cutting device assembly and the expulsion chute, the collection bag or rear discharge shield must be fitted, the operator must be seated, the cutting device assembly must be in position “1”, the engine running, transmission placed in neutral and the cutting device must be connected. Then connect a water hose to the appropriate pipe fittings and allow the water to flow for a few minutes while keeping the cutting devices in motion.
What action should be carried out before winter storage or before storing it for a period longer than 30 days?
After allowing the engine to cool down and fully recharging the battery, disconnect the battery cables and store it in a cool and dry place. Empty the fuel tank, clean the machine thoroughly, check the condition of the cutting device assembly, and, if necessary, contact the service centre. Then store the lawn tractor with the cutting deck in a lowered position, in a sheltered environment and, if possible, covered with a sheet.
What action should be carried out before initially using a riding tractor that has been stored over a winter or for a period longer than 30 days?
Refuel it and check the oil level, air filter and petrol filter. Check that the tyres are correctly pressurised and then set up the lawn mower tractor according to how you intend to carry out the mowing (side discharge, collection, rear discharge, mulching). For further information about the preliminary operations and safety checks, please refer to the designated sections of the instructions manual.
What standard maintenance operations does the lawn mower tractor need?
Before each use, we recommend that you perform safety and control checks, check the tyre pressure, and replenish the fuel and oil tank, if necessary. After each use, arrange for a general cleaning of the machine. Please refer to the designated section of the instruction manual (“maintenance table”) for the regular actions recommended to ensure optimal use of the machine.
What are the cutting functions of the lawn tractor?
The riding tractor can be set up in different cutting modes: rear bag collection or rear discharge, or mowing and chopping the grass using the special “mulching kit” function. The mulching cutting system allows you to mow the grass into fine particles, which remain on the lawn, restore nutrients and support growth.
What kinds of parts and accessories can the tractor lawn mower be equipped with?
The lawn tractor can be equipped with various parts and accessories to increase its functions and ensure maximum versatility all year round. For the complete list of parts and accessories, please refer to the relevant product page on the website.
Related Products
Petrol tractor
Suggested working area
4500 ㎡
Cutting method
Side discharge
Cutting width
98 cm
Petrol tractor
Suggested working area
5000 ㎡
Cutting method
Side discharge
Cutting width
98 cm
Write Your Own Review