| Shop Online | No |
|---|
| Short Description | Lawn tractor with a 300 L collector bag and 102 cm cutting deck, suitable to cut grass in very big gardens. Powered by a twin-cylinder engine. Pedal-operated hydrostatic drive for easy speed management. Electromagnetic blade engagement clutch for effortless blade management. |
|---|
| EAN/UPC | 8008984851672 |
|---|
| Unique selling point 06 | Mulching kit available separately |
|---|
| Unique selling point 05 | Extra-comfort through ergonomically designed seat and soft-grip steering wheel |
|---|
| Unique selling point 04 | Electromagnetic blade engagement for easy blade management |
|---|
| Unique selling point 01 | Powerful collector, with a 300 L grassbag |
|---|
| Unique selling point 03 | 102 cm cutting deck with 7 available cutting heights for great flexibility |
|---|
| Unique selling point 02 | Powered by a twin-cylinder STIGA ST 650 engine |
|---|
| Key features 1 title | Capacious grass collector |
|---|
| Key features 1 description | The grassbag can contain up to 300 L of grass cuttings. Long mowing sessions, without stopping. |
|---|
| Key features 2 title | Effortless blade engagement |
|---|
| Key features 2 description | Blades can be activated or de-activated through a button. The electormagnetic clutch allows you to manage them without any stress. |
|---|
| Key features 3 title | Adapt the cutting to any grass condition |
|---|
| Key features 3 description | Thanks to 7 available cutting height settings, the cutting deck can operate from 30 mm up to 90 mm and cut grass in different conditions. |
|---|
| Award 2 logo | no_selection |
|---|
| Award 3 logo | no_selection |
|---|
| Award 1 logo | no_selection |
|---|
| Certification CE logo | no_selection |
|---|
| FAQ 1 answer | The exterior of the tractor mower must be cleaned with water and detergent, paying attention not to get water in the electrical system, motor and circuit board located under the instrument panel. The collection bag should be emptied and cleaned of residue, then remounted so the cutting assembly can be washed, and then removed, rinsed and allowed to dry. When washing the cutting device assembly and the expulsion chute, the collection bag or rear discharge shield must be fitted, the operator must be seated, the cutting device assembly must be in position “1”, the engine running, transmission placed in neutral and the cutting device must be connected. Then connect a water hose to the appropriate pipe fittings and allow the water to flow for a few minutes while keeping the cutting devices in motion. |
|---|
| FAQ 1 question | What is the proper way to clean the lawn tractor after mowing the grass? |
|---|
| FAQ 2 question | What action should be carried out before winter storage or before storing it for a period longer than 30 days? |
|---|
| FAQ 2 answer | After allowing the engine to cool down and fully recharging the battery, disconnect the battery cables and store it in a cool and dry place. Empty the fuel tank, clean the machine thoroughly, check the condition of the cutting device assembly, and, if necessary, contact the service centre. Then store the lawn tractor with the cutting deck in a lowered position, in a sheltered environment and, if possible, covered with a sheet. |
|---|
| FAQ 3 question | What action should be carried out before initially using a riding tractor that has been stored over a winter or for a period longer than 30 days? |
|---|
| FAQ 3 answer | Refuel it and check the oil level, air filter and petrol filter. Check that the tyres are correctly pressurised and then set up the lawn mower tractor according to how you intend to carry out the mowing (side discharge, collection, rear discharge, mulching). For further information about the preliminary operations and safety checks, please refer to the designated sections of the instructions manual. |
|---|
| FAQ 4 question | What standard maintenance operations does the lawn mower tractor need? |
|---|
| FAQ 4 answer | Before each use, we recommend that you perform safety and control checks, check the tyre pressure, and replenish the fuel and oil tank, if necessary. After each use, arrange for a general cleaning of the riding tractor. Please refer to the designated section of the instruction manual (“maintenance table”) for the regular actions recommended to ensure optimal use of the machine. |
|---|
| FAQ 5 question | What are the cutting functions of the lawn tractor? |
|---|
| FAQ 5 answer | The riding tractor can be set up in different cutting modes: rear bag collection or rear discharge, or mowing and chopping the grass using the special “mulching kit” function. The mulching cutting system allows you to mow the grass into fine particles, which remain on the lawn, restore nutrients and support growth. |
|---|
| FAQ 6 question | What kinds of parts and accessories can the tractor lawn mower be equipped with? |
|---|
| FAQ 6 answer | The lawn tractor can be equipped with various parts and accessories to increase its functions and ensure maximum versatility all year round. For the complete list of parts and accessories, please refer to the relevant product page on the website. |
|---|
| Battery capacity | 18 Ah |
|---|
| Power | 10.6 kW |
|---|
| Power source | Petrol |
|---|
| Engine Brand | STIGA |
|---|
| Engine model | ST 650 Twin Powered by STIGA |
|---|
| Displacement | 635 cm³ |
|---|
| Engine rotation speed | 2400 rpm |
|---|
| Battery Voltage | 12 V |
|---|
| Choke | Manual |
|---|
| Engine cooling | Air |
|---|
| Fuel tank capacity | 7 l |
|---|
| Maximum working area | 5500.000000 |
|---|
| Cutting method | Collecting |
|---|
| Minimum uncut radius | 96 cm |
|---|
| Cutting width | 102 cm |
|---|
| Reverse mowing | Yes |
|---|
| Blade rotation | Timed |
|---|
| Cutting height adjustment | Manual with lever |
|---|
| Cutting height positions | 7 positions |
|---|
| Cutting height range | 30 - 90 mm |
|---|
| Number of blades | 2 |
|---|
| Blade type | Winged |
|---|
| Additional cutting method | Rear discharge, Mulching |
|---|
| Blade engagement type | Electric |
|---|
| Traction | Rear-wheel drive |
|---|
| Transmission type | Hydrostatic |
|---|
| Transmission method | Pedal-operated |
|---|
| Collector emptying | Manual |
|---|
| Collector capacity | 300 l |
|---|
| Steering wheel | Castelgarden ergonomic with soft grip |
|---|
| Seat type | Castelgarden smart with mid back support |
|---|
| Seat adjustment | Screws |
|---|
| Dashboard | Yes with LED |
|---|
| Front wheel size | 15x6.00-6 |
|---|
| Rear wheel size | 18x8.50-8 |
|---|
| Hour meter | No |
|---|
| Headlights | Conventional |
|---|
| Cruise control | No |
|---|
| Bumper | Yes |
|---|
| Washing link | Yes |
|---|
| Collector type | Textile |
|---|
| 12V socket | No |
|---|
| Cup holder | No |
|---|
| Pivoting front axle | Yes |
|---|
| Antiscalp wheels | 4 |
|---|
| Safety system | Seat with Safety Contact Breaker |
|---|
| Mulching kit | Optional |
|---|
| Battery charger | Optional |
|---|
| Trailer hitch kit | Optional |
|---|
| Measured sound power level dB(A) | 100 |
|---|
| Max vibration on steering wheels (m/s2) | 4 |
|---|
| Max vibration on driver's seat (m/s2) | 1 |
|---|
| Guaranteed sound power level (LwA) - dB(A) | 100 |
|---|
| Measured sound pressure level at operator ear dB(A) | 84 |
|---|
| Pack weight | 271.5 kg |
|---|
| Product length | 2550 mm |
|---|
| Product width | 1060 mm |
|---|
| Product height | 1310 mm |
|---|
| Product weight | 227.250000 |
|---|
| SKU | 2T0980473/C22 |
|---|
